Free delivery on orders over €50, excluding heavy items.
Orders are usually delivered within 1–2 working days of ordering, excluding weekends and public holidays.
NTLabs Clears Green & Cloudy Water Treatment 250ml
SKU: 0733809000130
Pickup available at Unit 3, Shandon
Usually ready in 4 hours
NTLabs Clears Green & Cloudy Water Treatment 250ml
-
Unit 3, Shandon
Pickup availableUsually ready in 4 hours
Unit 3, Shandon
Dungarvan
WD
X35 HR74
Ireland
NTLabs Clears Green & Cloudy Water Treatment 250ml
When to use?
- When water appears green and/or cloudy. Magiclear causes particles in the water to clump together which can then easily settle out of suspension or be removed by the filter.
How to use?
-
- Test the pH and KH of the water.
- Aerate pond well e.g. fountain, waterfall or air pump. Conduct a partial water change (as much as is practical) before use, especially if the water is extremely green, like “pea soup”.
- Switch off pump only if strong flow rate could prevent particles from clumping but remember to switch back on as soon as water clarifies.
- Mix the correct dose in a clean bucket of pond water, then pour evenly around the pond.
- Clean the collected particles from the filter after treatment.
- Without a filter, some clumps may float and can then be removed using a net. Use when you have plenty of time to observe the fish and take action in the unlikely event of a reaction.
Do Not
- Do not use when the dissolved oxygen may be low (e.g. at daybreak, in hot, humid or thundery weather, or within three hours of feeding).
- Do not use if the KH is below 6 or the pH is below 7.
- Do not use if there is nitrite in the water.